MD 180i/T

 
Order Number EM10055034

PRODUCT DESCRIPTION MD 180i/T

  • Wand-Bewegungsmelder mit 180° field of detection in 2-conductor version/Triac
  • In-built acoustic sensor for optimal use in areas with a complex layout
  • Can be programmed by remote control, e.g. continuous lighting ON/OFF and automatic storage of the current light value
  • Including cover frame IP 20 in 5 different colours
  • Compatible with brand switches; therefore replaces any conventional switch
  • IP 44 version suitable for damp rooms, garages and basement access ways. Vandal-proof cover with stainless steel screws (accessory)
  • Double plug-in terminals for through-wiring allow quick and easy installation
  • Manual control possible through in-built ON/OFF/AUTO switch
  • Prevent unwanted triggering of device e.g. by small animals, by masking the vertical field of detection by means of an enclosed covering cap
  • Universal surface-mounted box IP 20/IP 44 with triple diaphragm line entrance

Technical data MD 180i/T

  • Mains voltage: 230 V AC/50 Hz
  • Approx. power consumption: switching load 60 W: 0.8 W
  • Field of detection: 180° horizontal, 60° vertical
  • Range: approx. 16 m, at an installation height of 1,1 m - 2,2 m
  • Range [m]: 16 m
  • Setting options: mechanically by adjusting controller, electronically by infrared Mobil-PDi/MDi-universal remote controls (order separately)
  • Permissible ambient temperature: 0 °C ...+50 °C
  • Protection type: IP 20, IP 44 depending on cover (order separately)
  • Protection class: II
  • Installation type: Wall mounting
  • Housing material: UV-stabilised polycarbonate
  • Approx. dimensions: Height 70 mm x Width 70 mm x Length 63 mm
  • Slave input: no
  • Switch-off delay time: approx. 15 sec. - 30 mins.
  • Light value: approx. 5 - 2000 lux
  • Width [mm]: 70 mm
  • Height [mm]: 70 mm
  • Depth [mm]: 63 mm
  • Rec. installation height: 1,1 m

Accessories MD 180i/T

Mobil-PDi/MDi

  • The remote control for quick and precise setting of various parameters (no need to climb a ladder!)
  • For wall-mounted detectors of the MD 180i and PD 180i series and ceiling-mounted detectors of the MD, MD-C, PD, PD-C, MD-CE and PD-CE series

Cover IP 20

  • Cover IP 20 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suppression of the vertical field of detection with enclosed cap piece

Cover IP 20

  • Cover IP 20 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suppression of the vertical field of detection with enclosed cap piece

Cover IP 20

  • Cover IP 20 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suppression of the vertical field of detection with enclosed cap piece

Cover IP 20

  • Cover IP 20 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suppression of the vertical field of detection with enclosed cap piece

Cover IP 20

  • Cover IP 20 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suppression of the vertical field of detection with enclosed cap piece

Cover IP 44

  • Cover IP 44 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • Suitable for damp rooms such as bathrooms, garages and basements
  • Suppression of the vertical field of detection with enclosed cap piece
  • Increased tamper protection through stainless steel Inbus screws

Surface-mounted box IP 20/IP 44

  • Surface-mounted box IP 20/IP 44 for:- MD 180i/R- PD 180i/R- MD/PD 180 Slave- PD-C180i/16 UC- PD-C180i KNX- PD-C180i KNX ECO
  • With triple diaphragm line entrance

RC filter/snubber

  • Filter for suppression of inductive loads, such as relays, contactors, fluorescent lamps and transformers
  • Compact design for flexible use