The best price/performance ratio
for every room solution
In office buildings, educational institutions and health facilities, financial considerations must be factored in alongside the need for optimum light quality. This means that optimum lighting solutions must also meet the budget and project plans. ESYLUX Light Control provides the best work lighting, delivering enhanced quality of life with particularly low investment costs. The systems are completely pre-finished and use lights from the CELINE or NOVA series as well as presence detectors from the COMPACT series and the intelligent ELC control unit SMARTDRIVER. They are available in two versions, with either SymbiLogic or constant light colour.
Total price, fixed light colour (3000 + 4000 K)
including lights, presence detectors and control system
excluding installation costs
FROM 35 €/m2
ELC system solutions with SymbiLogic are particularly suited to areas such as open-plan offices and patient rooms. These are areas in which people spend a lot of time and can benefit from the effects of biologically effective light. The constant light colour version is recommended for areas that are occupied for only brief periods, such as corridors, entrance areas and staircases. With both options, an intelligent sensor system ensures that the lighting is presence and daylight dependent, providing maximum energy efficiency. ESYLUX Light Control offers the best use of daylight at an unrivalled low price per square metre.
Pre-configured, pre-finished set solutions
ESYLUX Light Control is available in various practical set solutions in line with demand, helping to deliver outstanding light quality and energy efficiency while also maximising the benefit for the user: The completely pre-finished ELC lighting systems are optimised for different room sizes and for the specific requirements in office buildings, classrooms and patient rooms. Thanks to the simple plug-and-play installation for the pre-configured components, using the cables included in the delivery, the set solutions can be put into operation right away without any need for programming. The system therefore offers the best, and fastest, route to intelligent lighting.
You can set up your customised ESYLUX Light Control configuration in just seven simple steps. Select your individual components and accessories in this order:
- Light design for the main lighting
- Light type
- Number of lights
Alternative: Customised configuration in 7 steps
ESYLUX is designed specifically to make solutions as simple and time-saving as possible, even at the planning stage, and to provide maximum flexibility once installed. As such, ESYLUX Light Control gives you a choice of pre-configured, pre-finished set solutions for offices, classrooms and patient rooms, as well as a convenient option to set up your own customised solution. In just seven steps, you can set up a customised ELC system for any application, any room size and any budget. All you need is the following system components: lights, control unit and sensor system, plus any supplementary devices you require.
Rapid grouping via plug-and-play
ESYLUX Light Control gives you maximum freedom to design a customised configuration, as the lights, sensor systems and control units can be scaled for any room size. Depending on the specific model, between two and four separate light channels are available, and groups created for separate room zones are easily networked using an ELC bus.
With the ELC solutions, energy-efficient human centric lighting is easily integrated into KNX systems: The seamless process uses an optional KNX module built into the SMARTDRIVER, and no separate gateway is required. The system is operational right away; the controller can be addressed for centralised control at a later point, when any individual adjustments can also be made.
Centralised manual control is always possible, as is the selection of individual scenes. In addition, it is possible to incorporate HVAC devices or supplementary lighting and control them in line with demand. Universal automation of grouped system units also works if individual SMARTDRIVERs are connected to different phases or networks.