PD-ATMO 360i/8 O KNX

Item number EP10427220

Thanks to its unique multi-sensor elements, the ATMO KNX presence detector ensures not only an optimal level of brightness, but also a healthy and productive ambient climate in the room. With a total of six sensors in just one device, there is no need for several individual solutions. This shows just how easy it is to accommodate complex requirements using intelligent technology.


Installation type Recessed mounting
Installation position Ceiling
Protection type IP20
Dimensions Height/Depth 74 mm, Ø 108 mm
Power consumption 0.3 W
Detection range diagonally Ø 8 m
Light measurement mixed light
Level of brightness 5 - 2000 lx
warranty 5 years

Technical data

Special product features microphone,
Lens lighting, choice of 7 colours,
VOC measurement,
relative humidity,
temperature measurement,
visual and acoustic alarming
Special product features Alarm via object , Twilight switch (1 item) , Brightness detection via the object , Light-dependent motion detection , Snooze function , Scene number over object
Conformity CE , RoHS , WEEE
Installation type Recessed mounting
Installation position Ceiling
Installation dimension Installation depth: 24 mm, Ø 60 mm
Connection 2,5 mm² / 1,5 mm²
Dimensions Height/Depth 74 mm, Ø 108 mm
Weight 205 g
Material UV-stabilised polycarbonate
Protection type IP20
Permissible ambient temperature 5 °C...+35 °C
Relative humidity 5 - 93 %, non-condensing
Colour white, similar to RAL 9010
Electrical version
Protection class II
Nominal voltage 230 V / 50 Hz
Stand-by consumption < 1 W
Power consumption 0.3 W
Power consumption 10 mA
Detection angle 360°
Detection range diagonally Ø 8 m
Detection range head-on Ø 6 m
Detection range zone de présence Ø 4 m
Field of detection 50 m²
Recommended installation height 3 m
Max. mounting height 5 m
Level of brightness 5 - 2000 lx
Slave input Yes, unit can be configured as a master or slave device
Fully automatic yes
Semi-automatic yes
constant lighting control 1
Switching delay from "dark to light" [s] 300 s
Switching delay from "light to dark" [s] 30 s
Switch-on delay channel 3 disabled/2 min - 30 min
Time setting channel 3 disabled/30 sec./1 min./12 hrs
Channel 1Lighting
Interface Switching/Dimming
Contact Bus system
Switch-off delay time disabled/30 sec./1 min./12 hrs
Orientation light disabled/10 - 50 %, 2 values can be selected
Switch-off delay time, orientation light only in controlling modus: continuous lighting/1 min - 250 min
Turn-on delay disabled/2 min - 30 min
Switch-off delay channel 2 10 sec.–1 hour
Bus voltage 29-31 V = (KNX)
KNX input manual light control, block objects, reset, slave
KNX output presence, status, light value, HVAC
Master/slave function 1
constant lighting control 1
Presence simulation 1
Manual override yes
Night-light feature yes
Light channel c1 + c2 switching/dimming, c2 offset from c1 (-100 % to +100 %)

Kontakt Sidebar - en-gb

Kontakt Sidebar


* Required