!
Product-specific information :
Separate DALI power supply required
Configuration via ESY-app (ESY-Pen required!) or IR remote control possible.
Special Product Features
| General | |
|---|---|
| Device category | Ceiling-mounted presence detector |
| Remote controllable | |
| Conformity | CE, EAC, RoHS, WEEE |
| EU Data-Act betroffen | |
| Warranty | 5 years |
| Mounting | |
|---|---|
| Installation type | Recessed mounting |
| Installation position | Ceiling |
| Type of connection | Push terminal |
| Connectable wire cross section | 0.6 – 0.8 mm² |
| Housing | |
|---|---|
| Dimensions | Height 60 mm, Ø 33 mm |
| Weight | 20 g |
| Material | UV-stabilised PE |
| Protection type | IP20 / IP54 below the ceiling (built-in) |
| Permissible ambient temperature | -25 °C...+50 °C |
| Relative humidity | 5 – 95 %, non-condensing |
| Colour | white, opal matt |
| Electrical version | |
|---|---|
| Control system | DALI |
| Protection class | III |
| Nominal voltage | 9.5 – 22.5 V DC |
| Power consumption | 0.3 W |
| Power consumption | 12 mA |
| Sensors | |
|---|---|
| Detection angle | 360° |
| Detection range diagonally | Ø 8 m |
| Detection range head-on | Ø 5 m |
| Detection range presence | Ø 3 m |
| Field of detection | up to 50 m² |
| Recommended installation height | 3 m |
| Max. mounting height | 3 m |
| Level of brightness | 10 – 2000 lx |
| Control | |
|---|---|
| Number of light channels | 1 |
| Number of HVAC-channels | 2 |
| Slave input | |
| Mode | Semi-automatic, Fully automatic |
| Constant light control | |
| Channels (lighting / HVAC): C1 Lighting | |
|---|---|
| Channel | C1 Lighting |
| Function | Regulate, Broadcast |
| Switch contact | Bus system |
| Switch-off delay time | 60 s...240 min (adjustable in steps) |
| Orientation light | 10 – 50 % luminous efficiency |
| Switch-off delay time, orientation light | 60 s...30 min |
| Channels (lighting / HVAC): C3 with accessory (ACTUATOR FULL AUTO C3 DALI) | |
|---|---|
| Channel | C3 with accessory (ACTUATOR FULL AUTO C3 DALI) |
| Function | Switching |
| Switching capacity | 10 A (12 V DC / 230 V AC) |
| Switch contact | make contact / floating |
| Push button input | |
| Switch-off delay time | 60 s...120 min (adjustable in steps) |
| Channels (lighting / HVAC): C4 with accessory (ACTUATOR SEMI AUTO C4 DALI) | |
|---|---|
| Channel | C4 with accessory (ACTUATOR SEMI AUTO C4 DALI) |
| Function | Switching |
| Switching capacity | 10 A (12 V DC / 230 V AC) |
| Switch contact | make contact / floating |
| Push button input | |
| Switch-off delay time | 60 s...120 min (adjustable in steps) |
| Light and building planning | ||
|---|---|---|
Planning data BIM | ||
