PD-C 180i/16 Touch KNX

Item number EP10460104

Offers special product features like

  • Touch function with touch-sensitive lens
  • Acoustic sensor
  • KNX functions: Twilight switch, motion direction detection function, brightness detection via object, light-dependent motion detection, night-light feature (seven colours available)

Shortfacts

Device category Wall-mounted presence detector
Installation type Recessed mounting / device box (Ø 68 mm)
Installation position Wall
Protection type IP40, IP44 depending on cover (order separately)
Dimensions Length 70 mm x Width 70 mm x Height/Depth 55 mm
Detection angle 180° horizontal, 60° vertical
Detection range diagonally Ø 16 m
Field of detection up to 101 m²
Permissible ambient temperature 5 °C...+50 °C
Warranty 5 years

Technical data

General
Device category Wall-mounted presence detector
Remote controllabledone
Conformity CE, EAC, RoHS, WEEE
Warranty 5 years
Mounting
Installation type Recessed mounting / device box (Ø 68 mm)
Installation position Wall
Installation dimension Installation depth: 25 mm, Ø 60 mm
Type of connection Push terminal
Housing
Dimensions Length 70 mm x Width 70 mm x Height/Depth 55 mm
Weight 35 g
Material UV-stabilised polycarbonate
Protection type IP40, IP44 depending on cover (order separately)
Permissible ambient temperature 5 °C...+50 °C
Relative humidity 5 - 93 %, non-condensing
Colour white, similar to RAL 9010
Electrical version
Control system KNX
Protection class III
Nominal voltage 29 - 31 V DC
Power consumption 0.2 W
Power consumption 6 mA
Sensors
Detection angle 180° horizontal, 60° vertical
Detection range diagonally Ø 16 m
Detection range head-on Ø 12 m
Detection range presence Ø 8 m
Field of detection up to 101 m²
Max. mounting height 2.2 m
Level of brightness 5 – 2000 lx
Control
Number of light channels 2
Number of HVAC-channels 1
Push button input lighting 1
Push button input HVACdone
Slave inputdone
Mode Semi-automatic, Fully automatic
Constant light controldone
Sensitivity configurabledone
KNX input manual light control, block objects, slave
KNX output presence, status, light value, HVAC
KNX functions Presence simulation, Manual override, Master- / slave-toiminto, Night-light feature, Sensitivity configurable, Sends a telegram at regular intervals
Channels (lighting / HVAC)
ChannelC1 Lighting
Function Switching, Regulate
Switch contact Bus system
Switch-off delay time 30 s...30 min (adjustable in steps)
Orientation light disabled/0 - 50 %, 2 values can be selected
Switch-off delay time, orientation light 60 s...250 min
ChannelC2 Lighting
Function Switching, Regulate
Offset setting c2 offset from c1 (-50 % to +50 %)
Switch contact Bus system
Switch-off delay time 10 s...60 min (adjustable in steps)
Orientation light disabled/0 - 50 %, 2 values can be selected
Switch-off delay time, orientation light 60 s...250 min
ChannelC3 HVAC
Function Switching
Switch-on delay 120 s...30 min
Switch-off delay time 10 s...60 min (adjustable in steps)

Kontakt Sidebar - en-gb

Kontakt Sidebar

CONTACT US

* Required

Similar products

Other Products

BOARDLIGHT

BOARDLIGHTWall and ceiling lights

Mehr
FLAT MINI

FLAT MINIBrightness controller

Mehr
CELINE

CELINERecessed lights

Mehr
PROTECTOR

PROTECTORSmoke alarm

Mehr
SMARTDRIVER

SMARTDRIVERControls

Mehr
ELX

ELXEmergency lights

Mehr