Change current country? Asia | Pacific English Australia | English Ireland | English
Product filter

Presence and motion detectors | FLAT MINI Saves energy without being noticed

  • Smallest design with a flat lens


Learn more >>

Delivery time from stock: approx. 72 hours
Detector type: Presence detectors
Control system: DALI
Protection type: IP55
Max. installation height: 3
Installation type: Installation
Installation position: Ceiling
Function: Switching
Function: Regulate
Zero-cross switching: No
Crosswise (A): 6.0
Sensing range: 360°
Remote controllable: Yes
Type of connection: Push terminal
Show all productsHide all products

Presence detectors / Ceiling mounting / DALI

1 Products
1 Products

The FLAT mini sensors have arguably the most unobtrusive design for an intelligent sensor and are therefore a suitable alternative for rooms where the technology should remain in the background as discreetly as possible. Their tiny housings mean that they retreat unobtrusively into the background, while nevertheless keeping a close eye on everything due to their high-quality sensor technology. At the same time, the particularly simple installation is impressive: Using a spring clamp or locking ring and, if required, through simple integration into brand switches.

  • Particularly unobtrusive with a flat lens, an installation height of only 3 mm and a diameter of 33 mm
  • Automatic DALI light control at a constant brightness level, depending on presence and daylight (constant light control)
  • Immediately ready for use thanks to pre-installed factory settings
  • Automatic configuration of light ballasts (DALI Broadcast)
  • Simple programming using remote control
  • Manual override with DALI push buttons possible
  • Can be combined with additional FLAT mini detectors to expand the presence detection (master/slave)
  • Reduction in light output after expiration of the switch-off delay time to provide an orientation light in hallways and passageways; with integrated switch-off warning
  • Option to extend with DALI switch from ESYLUX for presence-dependent HVAC control