×

PD-FLAT 360i/8 LARGE ROUND WHITE KNX

Item number EP10428685

Whether in an exclusive lounge or a prestigious board office — many locations feature elegant interior décor which demands equally attractive room technology. The perfect task for the FLAT presence and motion detectors: With their flat design, they have a particularly unobtrusive appearance, while a range of variants offers the perfect solution for every taste.

Shortfacts

Installation type Recessed mounting
Installation position Ceiling
Protection type IP20
Dimensions Height/Depth 30 mm, Ø 104 mm
Power consumption 0.2 W
Detection angle 360°
Detection range diagonally Ø 8 m
Field of detection up to 50 m²
Light measurement mixed light
Level of brightness 3 - 1000 lx
Warranty 5 years

Technical data

General
Special product features Alarm via object , Twilight switch (1 item) , Brightness detection via the object , Light-dependent motion detection , Snooze function , Scene number over object
Remote controllable 1
Conformity CE , RoHS , WEEE
Mounting
Installation type Recessed mounting
Installation position Ceiling
Installation dimension Installation depth: 24 mm, Ø 60 mm
Connection WAGO
Housing
Dimensions Height/Depth 30 mm, Ø 104 mm
Weight 83 g
Material UV-stabilised polycarbonate
Protection type IP20
Permissible ambient temperature 5 °C...+35 °C
Relative humidity 5 - 93 %, non-condensing
Colour white, similar to RAL 9010
Electrical version
Protection class III
Nominal voltage 29 - 31 V
Power consumption 0.2 W
Power consumption 6 mA
Sensors
Detection angle 360°
Detection range diagonally Ø 8 m
Detection range head-on Ø 6 m
Detection range presence Ø 4 m
Field of detection up to 50 m²
Recommended installation height 2.5 m
Max. mounting height 5 m
Level of brightness 3 - 1000 lx
Slave input Yes, unit can be configured as a master or slave device
Fully automatic yes
Semi-automatic yes
Constant light control 1
Switching delay from "dark to light" [s] 300 s
Switching delay from "light to dark" [s] 30 s
Control
Time setting channel 3 10 sec.–1 hour
Channel 1Lighting
Interface Switching/Dimming
Contact Bus system
Switch-off delay time disabled/30 sec./1 min./12 hrs
Orientation light disabled/10 - 50 %, 2 values can be selected
Switch-off delay time, orientation light only in controlling modus: continuous lighting/1 min - 250 min
Bus voltage 29-31 V = (KNX)
KNX input manual light control, block objects, reset, slave
KNX output presence, status, light value, HVAC
Master/slave function 1
Presence simulation 1
Manual override yes
Night-light feature yes
Light channel c1 + c2 switching/dimming, offset (-50 % to +50 %)

Kontakt Sidebar - en-gb

Kontakt Sidebar

CONTACT US

* Required